Crestron CP4N Mulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Mulai Cepat untuk Sistem Kontrol Crestron CP4N. Crestron CP4N 5 halaman.
Juga untuk Crestron CP4N: Mulai Cepat (5 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman)

Halaman Cetak

CP4/CP4N

4-Series Control System

Connect the Control Subnet

(CP4N Only)

The CP4N has a dedicated Control Subnet that is used for

communication between the control system and Crestron Ethernet

devices without interference from other traffic on the network.

CAUTION: Do not connect the CONTROL SUBNET port to the LAN.

The CONTROL SUBNET port must only be connected to Crestron

Ethernet devices.

For more information on using the Control Subnet, refer to the 3-Series®

Control System Reference Guide (Doc. 7150) at

www.crestron.com/manuals.

Configure the Device

The control system may be configured using the provided web

configuration interface. The interface can be accessed using the control

system IP address or the Crestron XiO Cloud™ service.

Configuration via IP Address

To access the web configuration interface using the control system

IP address:

NOTE: The control system ships with DHCP enabled. A DHCP server is

required to access the web configuration interface via the device

IP address.

1. Connect the control system to the network.

2. Use the Device Discovery tool in Crestron Toolbox™ software to

discover the control system and its IP address on the network.

3. Enter the control system IP address into a web browser.

Configuration via Crestron XiO Cloud

The Crestron XiO Cloud service allows supported Crestron devices across

an enterprise to be managed and configured from one central and secure

location in the cloud. Supported devices are configured to connect to the

service. Use of the service requires a registered Crestron XiO Cloud

account.

NOTE:

The device may be disconnected from the service by navigating

to the Cloud Services tab in Crestron Toolbox software (Functions >

Device Info > Cloud Services). For details, refer to the Crestron

Toolbox help file.

To access the web configuration interface using the Crestron XiO Cloud

service:

1. Connect the control system to the network.

2. Record the MAC address and serial number that are labeled on the top

of the control system. The MAC address and serial number are

required to add the device to the service.

3. Do either of the following

For existing accounts, access the Crestron XiO Cloud service at

https://portal.crestron.io.

For new accounts, register for a Crestron XiO Cloud account at

www.crestron.com/xio-cloud-registration.

4. Claim the device to the service as described in the Crestron XiO Cloud

User Guide (Doc. 8214) at www.crestron.com/manuals.

5. Select the device from the cloud interface to view its settings.

Quick Start