Accutone A10 ALPHA Panduan Pengguna & Panduan Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna & Panduan Instalasi untuk Penguat Accutone A10 ALPHA. Accutone A10 ALPHA 10 halaman. Telephone & multimedia amplifier

Halaman Cetak

1. Connect to Telephone

operating the unit.

A10 Alpha in action! Comfort & Convenience.

B.1.2 Using Headset with Computer

Switch to Computer position through the Telephone/Computer Application

Switch. Select Headset position from the Headset/Handset Application

Switch for using headset. When a phone call comes in or you want to make a

call but during your computer work, simply switch to Telephone position and

lift the handset from the cradle or press the Speaker-phone button. By

selecting Computer position and place the handset back to its cradle or turn

off the Speaker-Phone button, you can return to your existing computer

work.

PC LINE IN

B.1

mute

PC LINE OUT

part b. begin to operate.

operating the unit.

B.2

B.2 Troubleshooting

problem

There is no response

Check if the batteries are too low, replace if required.

from the unit.

Check if the Polarities of batteries are placed correctly.

Make sure the On/Off switched to ON.

Check if the Configuration Switch is properly selected.

Volume Control and Mute button are adjusted properly.

Headset/Handset and Telephone/Computer switches are

properly selected.

Check if the telephone patch cable is properly connected.

I cannot hear any

Check if the Telephone/Computer switch is selected at

telephone.

dial tone or my

Make sure the Configuration Switch is properly selected.

caller speaking to

Try other positions until you can hear it well.

me on the other

side.

Make sure the Mute button is not pressed down.

Use the screwdriver to check if Mic volume is set too low.

My Caller cannot

Try to select the proper settings with the configuration

hear me at all or

switch.

cannot hear me very

well.

The rotary transmit Mic volume control is set too high.

Reduce this volume or refer to section I.3.3.

I hear my voice too

loud and there is a

squealing sound.

Take a look at the connection on your computer where the

cables connect with the A10 amplifier. There should be 3

When using with my

jacks (line-in, line-out and speaker).

computer, the sound

is too loud even

Make sure the line-out cable from the amplifier is

though the volume is

connected to the line-in jack of the computer.

set at minimum.

Make sure that the line-in cable from the amplifier is

connected to the line-out jack of the computer and NOT

the speaker jack.

part b. troubleshooting.

A10 Alpha in action! Comfort & Convenience.

items to check