Actron AutoScanner OBD II Scan Tool CP9575 Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Medis Actron AutoScanner OBD II Scan Tool CP9575. Actron AutoScanner OBD II Scan Tool CP9575 16 halaman. Autoscanner obd ii scan tool
Halaman Cetak
• Always turn the ignition key OFF when connecting or
disconnecting electrical components, unless otherwise
instructed.
• Most vehicles are equipped with air bags. If you elect to work
around air bag components or wiring, follow your vehicle
service manual cautions. You could be seriously injured or
killed by an unintended deployment.
• Always follow vehicle manufacturer's warnings, cautions, and
service procedures.
About the Tool
The Tool allows you to retrieve and erase/reset diagnostic data from
the vehicle control module. The diagnostic data can be used to help
determine the cause of a vehicle malfunction.
Use the Tool to perform the following functions:
Codes/Data
Diagnostic Codes / Pending DTCs
View Data
MIL Status
I/M Monitors
Freeze Data
Vehicle Information
State OBD Check
Drive Cycle Mode
Tool Parts
LCD Display
READ key
The air bag can still open several minutes
after ignition is turned off.
8 line by 21 character monochrome backlit
LCD.
Performs the Read Codes function and scrolls
back through the screens. Press this key
when an up arrow () appears on the display.
4
Erase/Reset
Erase
--
--
Reset
Erase
--
Erase
Reset
Retrieve