Digital Dowsing S.E.M Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Ukur Digital Dowsing S.E.M. Digital Dowsing S.E.M 2 halaman.

Halaman Cetak
Digital Dowsing S.E.M Panduan Pengguna
The SEM Modes & Operation
 Mode 1 – Energy Level Mode
Mode 1 will show you the energy
around the meter and display it on a 5
LED display. The sensitivity can be
changed using the up / down buttons to
filter background energy. Instead of
"averaging," energy is sampled rapidly,
allowing the display to show different
energy levels. Pressing the left button
increases the sensitivity; pressing the
right button decreases the sensitivity.
 Mode 2 – Energy Level Mode with
Audio Tones
Mode 2 will show you the energy
around the meter and display it on a 5
LED display. The sensitivity can be
changed using the up / down buttons to
filter background energy. Instead of
"averaging," energy is sampled rapidly,
allowing the display to show different
energy levels. Pressing the left button
increases the sensitivity; pressing the
right button decreases the sensitivity.
Includes Audio Tones which will
alert you to these changes.
The SEM Modes (continued)
 Mode 3 – Averaged Energy Level
Mode
Mode 3 will show you the energy around
the meter and display it on a 5 LED
display, using the center LED to act as the
average. By doing this, you can now see
changes of both increases and decreases
of energy.
 Mode 4 – Averaged Energy Level
Mode with Audio Tones
Mode 4 will show you the energy around
the meter and display it on a 5 LED
display, using the center LED to act as the
average. By doing this, you can now see
changes of both increases and decreases
of energy.
 Includes Audio Tones which will alert
you to these changes.
Changing Modes
To change modes on the SEM, simply press
the MODE button on the faceplate of the
device.
When the SEM modes have been changed,
the corresponding LED will light up.
 Mode 1 will illuminate the first green
light on the left.
 Mode 2 will illuminate the green light
second from the left.
 Mode 3 will illuminate the yellow
light.
 Mode 4 will illuminate the red light
second from the right.