Digital Equipment AlphaStation 600 Series Lembar Informasi - Halaman 4

Jelajahi secara online atau unduh pdf Lembar Informasi untuk Desktop Digital Equipment AlphaStation 600 Series. Digital Equipment AlphaStation 600 Series 4 halaman. 333 mhz upgrade

Halaman Cetak
22. Reinstall the front bezel on the front of the system unit.
23. Install the four pieces (two long and two short) of EMI gasket material around the system
board I/O opening at the rear of the system unit by removing the paper backing from each
piece and sticking them on the inside edges of the opening (see Figure 3
Figure 3: Installing the EMI Gaskets
24. Refer to the AlphaStation 600 Series User Information manual and reinstall the drive assembly.
25. Refer to the online Digital AlphaStation 600 Series Service Information file and reinstall the
new 333 MHz system board and cache modules. Ensure that the OCP ribbon and twisted-pair
cables are properly reconnected to the new system board (see Figure 2
26. Refer to the AlphaStation 600 Series User Information manual and reinstall the left side panel.
27. Install the new FCC label over the old FCC label on the rear of the system unit.
1
MLO-011830
4
).
).