ActronAir ECOFLEX MINI VRF R-32 Series Panduan Pemilik - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pendingin Udara ActronAir ECOFLEX MINI VRF R-32 Series. ActronAir ECOFLEX MINI VRF R-32 Series 20 halaman. Four-way compact cassette
Juga untuk ActronAir ECOFLEX MINI VRF R-32 Series: Panduan Pemilik (20 halaman), Panduan Pemilik (20 halaman), Panduan Pemilik (20 halaman), Panduan Pemilik (20 halaman), Panduan Pemilik (20 halaman)
Halaman Cetak
Owner's Manual
The air conditioner makes
low noise
Switching from cooling/
heating (not available for
cooling only units) mode
to fan only mode
In winter, the outdoor
temperature is low, and
heating effects may be
decreased
No heating or cooling
options
04. Display panel
Display functions:
1. In Standby mode, the main interface displays "---".
2. When starting up in Cooling or Heating mode, the main interface displays the set temperature. In Fan mode, the
main interface displays the indoor temperature. In Dry mode, the main interface displays the set temperature, and
when the humidity is set, the set humidity value is displayed on the wired controller.
3. The light display on the main interface can be turned on or off through the light button on the remote controller.
14
1. When the air conditioner is in "Auto", "Cool", "Dry", and "Heat" modes, it may emit a
low continuous "hissing" sound, which is caused by the refrigerant flowing between the
Indoor Unit and the Outdoor Unit.
2. A "hissing" sound may be heard for a short time after the air conditioner stops operation
or during "defrosting", which is caused when the refrigerant stops flowing or changes its
flow.
3. When the air conditioner is in Cool mode or Dry mode, a small and continuous rustling
sound can be heard, which is caused by the drain pump.
4. When the air conditioner starts or stops running, you may hear a squeaking sound which
is produced by the expansion or shrinkage of parts or surrounding aesthetic materials
due to temperature change. The sound will disappear when the air conditioner is
running normally.
When the Indoor Unit reaches the set temperature, the air conditioner compressor
automatically stops operation and switches to the fan only mode. When the room
temperature rises (in cooling mode) or falls (in heating mode) to a certain level, the
compressor is restarted and cooling or heating operation is resumed.
1. During the heating operation of the heat pump type air conditioner, the air conditioner
absorbs heat from the outdoor air and releases it to heat the indoor air. This is the heat
pump heating principle of the air conditioner.
2. When the heat pump runs in heating mode, the Outdoor Unit blows out cold air, causing
the outdoor temperature to drop. When the outdoor temperature is extremely low, the
heating capability of the air conditioner drops gradually. You are advised to use other
heating devices for heating.
All Indoor Units in the same air conditioning system can only operate in the same mode, for
example, cooling, heating, or others. Conflict may occur is Indoor Units are set to different
modes. Only the Indoor Unit that is first started up can determine the operating mode, and
those started after it can only follow the operating mode of the first Indoor Unit. To change
the operating mode, you need to turn off all the Indoor Units. The operating mode of all
Indoor Units must be the same.
Owner's Manual ECOFLEX MINI VRF R-32 SERIES - HIGH WALLS
Doc. No.9590-4028-07 Ver. 1 230821
ECOFLEX MINI VRF R-32 SERIES