Bitstream HYPERION-300 Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Beralih Bitstream HYPERION-300. Bitstream HYPERION-300 8 halaman. Gigabit ethernet industrial switch
Juga untuk Bitstream HYPERION-300: Panduan Memulai Cepat (7 halaman)

Halaman Cetak

5 – 1-Wire interface connector and two digital inputs;

6 – relay output connector;

7 – RS232/485 interface connector;

8 – RS232 interface connectors;

9 – DEF button;

1.1 Signaling description

Designation of signaling diodes :

1 – ERROR: critical alarm indicator;

2 – POWER1: power indicator through connector number 1;3 – POWER2: power indicator through

connector number 2;

4 – ALARM 3: relay output status indicator;

5 – ALARM 2: relay output status indicator;

6 – ALARM 1: alarm indicator;

Ethernet interface status indication

Each Ethernet port is equipped with two signaling LEDs.

1G/s – Ethernet link signaling for 1000Mbit/s throughput.

10/100M/s – Ethernet link signaling for 10/100Mbit/s bit rate.

1.2 Description of electrical connections

The device is equipped with eight RJ45 Ethernet interface ports

The arrangement of individual signals for RJ-45 connectors is shown in the table.

RJ-45 CONNECTOR (PE1-PE8) Ethernet 10/100Mbit/s

1 - (white and orange.)

2 - (orange)

3 - (white-green)

6 - (green)

REV.

1.19

HYPERION-300 quick guide

Fig. 1. Signaling diodes.

Fig. 2. Appearance of the RJ-45 connector

RXAn

RXBn

TX An

TXBn

Hyperion 30x manual

https://bitstream.pl

Channel n transmitter

n channel receiver

2023.04.05

3_ 8