Digital Equipment DEClaser 3500 Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Printer Digital Equipment DEClaser 3500. Digital Equipment DEClaser 3500 10 halaman. Internal fax modem
Juga untuk Digital Equipment DEClaser 3500: Panduan Instalasi (16 halaman)

Halaman Cetak

. . . . . . . . . . . . . . . . . . . . . . .

ELECTROSTATIC DISCHARGE

A discharge of static electricity from a finger or other conductor

may damage circuit boards or other static-sensitive devices.

This type of damage may reduce the life expectancy of the

device. To prevent electrostatic damage, observe the following

precautions:

Avoid hand contact by transporting and storing parts in

static-safe containers.

Keep electrostatic-sensitive parts in their containers until

they arrive at static-free work stations.

Place parts on a grounded surface before removing them

from their container.

Avoid touching pins, leads, or circuitry.

Always be properly grounded when touching a static-

sensitive component or assembly.

GROUNDING METHODS

Use one or more of the following grounding methods when

handling or installing electrostatic-sensitive parts:

Use a flexible wrist strap with a minimum of 1 megohm ± 10

percent resistance in the ground cord that is connected to a

grounded workstation or the printer chassis. To provide a

proper ground, wear the strap snug against the skin.

Use heel straps, toe straps, or boot straps on both feet

at standing workstations. Stand on conductive floors

or dissipating floor mats.

Use conductive field service tools.

Use a portable field service kit with a folding static-

dissipating work mat.

If you do not have the proper grounding equipment, have an

Authorized Service Provider install the part.

For additional information on static electricity, or

NOTE:

assistance with the installation of this product, contact your

Authorized Service Provider.

Part Number 194679-001 - 08/12/94 - - Saved by digital - -

Rev # 9 - File Name FONT2.DOC