Epson WorkForce WF-3530 Panduan Cepat - Halaman 23
Jelajahi secara online atau unduh pdf Panduan Cepat untuk Printer Epson WorkForce WF-3530. Epson WorkForce WF-3530 44 halaman. Epson workforce wf-3530 all-in-one printer
Juga untuk Epson WorkForce WF-3530: Spesifikasi (4 halaman), Mulai Cepat (4 halaman), Panduan Pengguna (4 halaman), (Panduan Instalasi) (4 halaman)
Halaman Cetak
Maintaining Your Product
Follow the instructions in this chapter to check and clean the print head nozzles, check ink
levels, and replace ink cartridges. If you need to align the print head or replace the
maintenance box, see the online User's Guide.
Checking the Print Head Nozzles
If your printouts are faint or have gaps in them, some of the nozzles in the print head may
be clogged or ink may be running low in one or more of the ink cartridges. Follow the
steps below to check the print head nozzles.
1.
Load a few sheets of plain paper in cassette 1.
2.
Press
if necessary, then press l or r and select
3.
Select
Maintenance
4.
Press one of the x buttons. The nozzle check is printed.
5.
Check the printed pattern to see if there are gaps in the lines.
Nozzles are clean
6.
If there are no gaps, the print head is clean. Select
If there are gaps or the pattern is faint, select
instructions on the screen to clean the print head (see page 24).
, then
Nozzle Check
.
Setup
.
Nozzles need cleaning
.
Done
Clean the Print Head
Maintaining Your Product
. Then follow the
23