Epson Workforce WF-7310 Series Mulai di sini

Jelajahi secara online atau unduh pdf Mulai di sini untuk Printer Epson Workforce WF-7310 Series. Epson Workforce WF-7310 Series 4 halaman.

WF-7310 Series

Start Here

IMPORTANT: Before using this product, make sure you read

these instructions and the safety instructions in the online User's

Guide.

Note:

This printer is designed for use with Epson

third-party cartridges or ink. For important ink information, visit

www.epson.com/epsonink (U.S.) or www.epson.ca/epsonink (Canada)

or see your printer box.

Unpack

Note:

Do not open the ink cartridge packages until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

Remove all protective materials from the product.

Open the printer cover until it locks into place and remove

all protective materials from inside the product.

Caution:

Do not touch the flat white cable.

Close the printer cover.

cartridges only, not

Turn on and configure

Connect the power cord to the back of the product and to

an electrical outlet.

Caution:

Do not connect to your computer yet.

Raise the control panel and turn on the product.

Note:

If an error code appears, turn off the product and check

that no protective material has been left inside the product.

Select your language and time on the LCD screen.

Note:

You can change these settings later using the product's

control panel. For more information, see the online User's Guide.

Install ink cartridges

Caution:

Keep the ink cartridges out the reach of children and do not

drink the ink.

Note:

The included initial cartridges are designed for reliable printer

setup and cannot be used as replacement cartridges or resold. After

setup, the remaining ink is available for printing.

Open the printer cover, then open the ink cartridge cover.

e ink cartridges, and remove them from the

Gently shake th

packaging.