Bitvae S3 Buku Petunjuk - Halaman 8
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Sikat Gigi Elektrik Bitvae S3. Bitvae S3 9 halaman. Sonic electric toothbrush
Juga untuk Bitvae S3: Panduan Pengguna (12 halaman)
Halaman Cetak9. Common Problems
If the device cannot start, it may be due to one of the following
reasons:
1 ) The power supply is too low, and the power supply light will flash
when the power is low. The toothbrush can be re-started after a
deep charge
2) The device is charging
3) There is a foreign body stuck in the switch
Why can't APP nd the device?
Please make sure your Bluetooth settings are on and that your
electric toothbrush is powered and connected!
How do I add a new device?
1 ) When the toothbrush is not paired, the app will prompt you to
pair or click the drop-down button to open device management.
"Add" can be used for device scanning
2) After tuning on the device, keep it close to the phone. Under
normal circumstances, the new device will show up in the device
scan list
3) Click the scanned device to pair according to the prompts
How to update the rmware program of the toothbrush equipment?
Connect the toothbrush device, enter "Settings" - "Firmware
Upgrade" on the home page, and follow the prompts to complete
the upgrade
Can't access the real-time brushing interface while brushing?
1 ) Please re-start the app
2) In standby state, long press the toothbrush on key for 10 seconds
until the operation light goes out once, and then press the switch
again to wake up
Can you pair multiple toothbrush devices?
The APP can pair multiple toothbrush devices, and the data of
different toothbrush devices can be saved separately. You can switch
or add devices under the device management function
Can't nd my paired toothbrush?
1 ) Low battery on your toothbrush
2) The toothbrush is far away from the phone
3) The toothbrush has been connected to another phone
4) The toothbrush enters dormant state and needs to be lifted to
wake up
5) The device enters deep sleep state. You need to tap the power
button to turn it on
6) Bluetooth is not turned on
Note: If none of the above situations occurs, please try the following
operation. Turn off the Bluetooth and app on the mobile phone,
restart the Bluetooth and app, and try to search for the device again.
If still cannot find the toothbrush, long press the device switch for 10
seconds, then press the switch to wake up, and then use the app to
search for the device again.
Power description
1 ) When the power of the toothbrush is less than 10%, the app will
remind you of the low power. In order not to affect normal use,
please charge it in time.
2) When the power of the toothbrush is less than 5%, it will enter the
low power protection mode. The toothbrush will not work. Please
use it after charging.
3) When the toothbrush is normally charged, please disconnect the
power supply for safe use and to extend the battery life.
If the device cannot be charged, the following circumstances may
be the cause
1 ) The equipment is in full power state
2) The required adapter is not being used
3) There is a foreign body in the charging interface
7