Siemens SIMATIC ET 200AL Manual - Halaman 16

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200AL. Siemens SIMATIC ET 200AL 25 halaman. 10-link digital output module dq 8x24vdc/2a 8xm12
Juga untuk Siemens SIMATIC ET 200AL: Manual (38 halaman), Manual (50 halaman), Manual (38 halaman), Manual (32 halaman), Manual (37 halaman), Panduan Peralatan (46 halaman), Manual (26 halaman), Panduan Peralatan (28 halaman), Panduan Peralatan (27 halaman)

Halaman Cetak
Siemens SIMATIC ET 200AL Manual

Parameters/address space

4.1

Parameters

The following table shows the parameters for the DQ 8x24VDC/2A 8xM12 IO-Link digital
output module.
Table 4- 1
Parameters
Parameters
Diagnostics: Missing load volt-
age 2L+
Diagnostics: Short-circuit to
ground
Reaction to CPU/master STOP
Substitute value channel
4.2

Explanation of the parameters

Diagnostics: Missing load voltage 2L+
Enabling of the diagnostics for missing or insufficient load voltage 2L+.
Diagnostics: Short-circuit to ground
Enabling of the diagnostics for short-circuit of the output to ground.
Reaction to CPU/master STOP
With this parameter, you set the reaction of the digital outputs of the module after a
CPU/master STOP:
• Shut down: The digital output is de-energized.
• Keep last value: The last value of the digital output remains activated.
• Output substitute value: The module outputs a configured substitute value.
Substitute value channel
With this parameter, you set substitute values for the digital outputs.
IO-Link digital output module DQ 8x24VDC/2A 8xM12 (6ES7142-5AF00-0BL0)
Equipment Manual, 08/2021, A5E47926730-AB
Value range
Value
Dec
Hex
.
.
Disable
0
0
Enable
255 FF
Disable
0
0
Enable
255 FF
Shutdown
0
0
Keep last value
2
2
Output substi-
3
3
tute value
0
0
0
1
255 FF
Default
Scope
Disable
Module
Disable
Module
(Short-circuit of an
output to ground)
Shutdown
Module
0
Channel
4
ISDU
ISDU
index
subindex
(decimal)
(decimal)
131
1
131
2
131
3
131
4 ... 11
15