Siemens simatic ET 200MP Manual - Halaman 13

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens simatic ET 200MP. Siemens simatic ET 200MP 39 halaman. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Juga untuk Siemens simatic ET 200MP: Manual (40 halaman), Manual (24 halaman), Manual (29 halaman), Manual (47 halaman), Manual (26 halaman), Manual (28 halaman), Manual (50 halaman), Manual (34 halaman), Panduan Pengguna (44 halaman), Manual (30 halaman), Manual (25 halaman), Manual (42 halaman), Manual (28 halaman), Manual (33 halaman), Manual (49 halaman), Manual (36 halaman), Manual (28 halaman), Panduan Peralatan (35 halaman), Panduan Peralatan (32 halaman), Manual (29 halaman), Manual (34 halaman), Manual (36 halaman), Panduan Peralatan (50 halaman), Manual (45 halaman)

Halaman Cetak

• Configurable diagnostics can be set for each channel

• Automatic backup of the device parameters during replacement of the IO-Link device

(only for V1.1 devices)

• Configuration limits:

– Max. 32 bytes input and output data per port

– Max. 240 bytes input and output data per module

The module supports the following functions:

• Firmware update

• Identification and maintenance data (I&M)

• IO-Link port configuration with S7-PCT

• IO-Link port configuration with STEP7 or GSD (without S7-PCT)

• Variable address range of I/O data with up to 240 byte inputs and 240 byte outputs

• Master backup with function block "LIOLink_Master"

• Port Qualifier Information (PQI)

• I&M 0 to 3

The module can be used with the following engineering tools:

Table 2-1 Engineering tools

Firmware version of the

module

V1.0 (in

CPU/PROFINET/PROFIBUS sta

tion)

Accessories/spare parts

The following accessories/spare parts are available for the module and can also be ordered

separately:

• Labeling strips

• U connector

• Universal front cover

The following component must be ordered separately:

• Front connectors, including potential jumpers and cable ties

Additional information

You can find more information on accessories in the S7-1500/ET 200MP Distributed I/O Sys

tem (https://support.industry.siemens.com/cs/ww/en/view/59191792) system manual in the

Accessories/Spare parts section.

2.2

Functions

IO-Link is a point-to-point connection between a master and a device. Both conventional and

intelligent sensors/actuators can be used as devices at the IO-Link via unshielded standard

Communication module IO-Link Master CM 8xIO-Link (6ES7547-1JF00-0AB0)

Equipment Manual, 08/2022, A5E45488510-AB

S7-PCT

STEP 7 (TIA Portal)

As of V3.5 SP1

Product overview

As of V15.1

2.2 Functions

GSD file