Siemens SIMATIC ET 200S Manual - Halaman 10

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200S. Siemens SIMATIC ET 200S 37 halaman. Distributed i/o digital electronic module 4do dc24v/2a hf
Juga untuk Siemens SIMATIC ET 200S: Panduan Operator (18 halaman), Manual (16 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (26 halaman), Manual (24 halaman), Manual Fungsi (40 halaman), Petunjuk Pengoperasian (4 halaman), Petunjuk Pengoperasian Asli (19 halaman), Petunjuk Pengoperasian Asli (20 halaman), Manual (34 halaman), Manual (14 halaman), Manual (24 halaman), Petunjuk Pengoperasian Asli (17 halaman), Petunjuk Pengoperasian Asli (19 halaman), Manual (16 halaman), Manual (28 halaman), Manual (12 halaman), Manual (32 halaman), Manual (18 halaman), Manual (12 halaman), Manual (28 halaman), Manual (22 halaman), Manual (22 halaman), Manual (36 halaman), Manual (16 halaman)

Halaman Cetak
Siemens SIMATIC ET 200S Manual
Properties
1.1 2AI TC ST analog electronic module (6ES7134-4JB00-0AB0)
Noise suppression for
f = n x (f1 ± 1 %), (f1 = interference frequency)
•
•
Crosstalk between the inputs
Operational limit (over the entire temperature
range, with reference to the input range)
Basic error limit (operational limit at 25°C with
reference to input range)
Temperature error (with reference to the input
range)
Linearity error (with reference to the input range)
Repeatability
(in steady state at 25°C with reference to input
range)
Input range (rated value)/input resistance
•
•
Permitted input voltage (destruction limit)
Connection of the sensors
•
Characteristic curve linearization
Temperature compensation
•
•
•
Smoothing of the measured values
For Type N: From -150 C, Type B: from 200 °C, Type T: from -230 C
1
10
Common-mode interference (U
Common mode interference
(peak value of interference < rated value of
input range)
1
Voltage
Thermocouple
For measuring voltage
Internal temperature compensation
External temperature compensation by
looping a compensating box into the
measuring circuit
External compensation by means of
temperature value obtained at an analog
module of the same ET 200S station
Suppression of interference, limits of error
)
Min. 90 dB
SS
Min. 70 dB
Min. -50 dB
± 0,6 %
1
± 0,4 %
± 0.005 %/K
± 0,01 %
± 0,05 %
Data for selecting a sensor
± 80 mV/min. 1 MΩ
Type E, N, J, K, L, S, R, B, T/min. 1 MΩ
± 10 V, continuous
Supported
Yes, can be assigned parameters for Type E, N,
J, K, L, S, R, B, T as per IEC 584
Not supported
Possible, one external compensating box per
channel
Yes
Yes, can be assigned parameters in 4 steps by
means of digital filtering
Step
None
Weak
Medium
Strong
2AI TC ST analog electronic module (6ES7134-4JB00-0AB0)
Time constant
1 x cycle time
4 x cycle time
32 x cycle time
64 x cycle time
Manual, 04/2007, A5E01076883-01