Siemens SIMATIC ET 200S Manual - Halaman 27

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200S. Siemens SIMATIC ET 200S 37 halaman. Distributed i/o digital electronic module 4do dc24v/2a hf
Juga untuk Siemens SIMATIC ET 200S: Panduan Operator (18 halaman), Manual (16 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (26 halaman), Manual (24 halaman), Manual Fungsi (40 halaman), Petunjuk Pengoperasian (4 halaman), Petunjuk Pengoperasian Asli (19 halaman), Petunjuk Pengoperasian Asli (20 halaman), Manual (34 halaman), Manual (14 halaman), Manual (24 halaman), Petunjuk Pengoperasian Asli (17 halaman), Petunjuk Pengoperasian Asli (19 halaman), Manual (16 halaman), Manual (28 halaman), Manual (12 halaman), Manual (32 halaman), Manual (18 halaman), Manual (12 halaman), Manual (28 halaman), Manual (22 halaman), Manual (22 halaman), Manual (36 halaman), Manual (16 halaman)

Non-isolated measuring encoders

The non-isolated measuring encoders are connected to the local ground potential. You must

connect M

potential differences U

measuring points.

If the permitted value for U

between the measuring points.

The following schematic representation illustrates the connection of non-isolated measuring

encoders to an optically isolated analog input module.

Connection of non-isolated measuring encoders to an optically isolated analog input module:

①

②

③

④

⑤

2AI TC ST analog electronic module (6ES7134-4JB00-0AB0)

Manual, 04/2007, A5E01076883-01

to the ground potential. Depending on local conditions or interference,

ANA

(static or dynamic) can occur between the locally distributed

Logic

Backplane bus

Ground bus

Equipotential bonding conductor

Non-isolated measuring encoders

is exceeded, there must be equipotential bonding conductors

5.1 Connecting measuring sensors

Connecting