Siemens SIMATIC ET 200S Manual - Halaman 13

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200S. Siemens SIMATIC ET 200S 16 halaman. Distributed i/o digital electronic module 4do dc24v/2a hf
Juga untuk Siemens SIMATIC ET 200S: Panduan Operator (18 halaman), Manual (16 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (26 halaman), Manual (37 halaman), Manual (24 halaman), Manual Fungsi (40 halaman), Petunjuk Pengoperasian (4 halaman), Petunjuk Pengoperasian Asli (19 halaman), Petunjuk Pengoperasian Asli (20 halaman), Manual (34 halaman), Manual (14 halaman), Manual (24 halaman), Petunjuk Pengoperasian Asli (17 halaman), Petunjuk Pengoperasian Asli (19 halaman), Manual (28 halaman), Manual (12 halaman), Manual (32 halaman), Manual (18 halaman), Manual (12 halaman), Manual (28 halaman), Manual (22 halaman), Manual (22 halaman), Manual (36 halaman), Manual (16 halaman)

Diagnostics

3.1

Power module

LED displays on the power module:

①

②

Status and error displays by means of LEDs on power modules

The table below shows the status and error displays on the power module.

Event (LEDs)

PWR

Off

Power module PM-E DC24V HF (6ES7138-4CA60-0AB0)

Manual, 06/2010, A5E02515369-02

Batch error (red)

Load voltage (green)

Cause

No parameter assignment or incorrect

module plugged in. A diagnostic message

is pending.

There is no load voltage at the power

module.

Remedy

Check the parameter assignment.

Evaluate the diagnostics.

Check the load voltage.