Siemens SIMATIC ET 200S Manual - Halaman 18

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200S. Siemens SIMATIC ET 200S 22 halaman. Distributed i/o digital electronic module 4do dc24v/2a hf
Juga untuk Siemens SIMATIC ET 200S: Panduan Operator (18 halaman), Manual (16 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (26 halaman), Manual (37 halaman), Manual (24 halaman), Manual Fungsi (40 halaman), Petunjuk Pengoperasian (4 halaman), Petunjuk Pengoperasian Asli (19 halaman), Petunjuk Pengoperasian Asli (20 halaman), Manual (34 halaman), Manual (14 halaman), Manual (24 halaman), Petunjuk Pengoperasian Asli (17 halaman), Petunjuk Pengoperasian Asli (19 halaman), Manual (16 halaman), Manual (28 halaman), Manual (12 halaman), Manual (32 halaman), Manual (18 halaman), Manual (12 halaman), Manual (28 halaman), Manual (22 halaman), Manual (36 halaman), Manual (16 halaman)

Analog value representation

4.4 Effect on analog value representation

4.4.2

Effect of the value range on the 2AO I ST analog output

The way electronic modules respond to analog outputs depends on where the output values

fall within the value range. This is illustrated by the table below.

Table 4-6

Response of the analog modules, depending on where the analog output value falls within the range of values

Output value falls in ...

Nominal range

Over-/underrange

Overflow

Underflow

Prior to parameter assignment, or incorrect parameter

assignment*

* With product version 1 of the 2AO I ST, the following applies: If the configured substitute value is outside the nominal

range, a diagnostic message for a parameter assignment error is registered and the SF LED lights up. In this status the

output values transferred from the DP master are output at the analog output modules.

Output value in SIMATIC S5/S7 format

Value from DP master

0-signal

2AO I ST analog electronic module (6ES7135-4GB01-0AB0)

Manual, 04/2007, A5E01076949-01