Siemens SIMATIC ET 200S Manual - Halaman 33

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200S. Siemens SIMATIC ET 200S 36 halaman. Distributed i/o digital electronic module 4do dc24v/2a hf
Juga untuk Siemens SIMATIC ET 200S: Panduan Operator (18 halaman), Manual (16 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (26 halaman), Manual (37 halaman), Manual (24 halaman), Manual Fungsi (40 halaman), Petunjuk Pengoperasian (4 halaman), Petunjuk Pengoperasian Asli (19 halaman), Petunjuk Pengoperasian Asli (20 halaman), Manual (34 halaman), Manual (14 halaman), Manual (24 halaman), Petunjuk Pengoperasian Asli (17 halaman), Petunjuk Pengoperasian Asli (19 halaman), Manual (16 halaman), Manual (28 halaman), Manual (12 halaman), Manual (32 halaman), Manual (18 halaman), Manual (12 halaman), Manual (28 halaman), Manual (22 halaman), Manual (22 halaman), Manual (16 halaman)

5.2

Wiring unused channels of the analog input modules

Rules

Pay attention to the following instructions when wiring unused channels:

● "Disable" unused input channels when setting parameters.

● A disabled channel always returns the value 7FFF

● The module cycle time is halved with the 2AI RTD HF standard module.

● To adhere to the permissible potential differences, you must wire jumpers on the terminal

2AI RTD HF

5.3

Rules

To prevent interference we recommend the following with the analog electronic modules:

● Use shielded wires to the sensors and actuators.

● Lay out the wire shields on the shield connection.

● Connect the shield connection with low impedance to the ground bus.

2AI RTD HF analog electronic module (6ES7134-4NB51-0AB0)

Manual, 05/2007, A5E01076876-02

module for the unused channels.

Analog input module

5.2 Wiring unused channels of the analog input modules

TM connection terminal

Channel 0

Connecting

Channel 1