Siemens SIMATIC ET 200SP Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 21 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Halaman Cetak
Siemens SIMATIC ET 200SP Panduan Pengguna
3.3.2

Input data for interface modules with maximum 32 I/O modules

Configuration with enabled status detection of the supply voltage L+ (4 bytes of input data)
You can read out the following status for each I/O module of the ET 200SP in the input data
(byte 0 to 3):
● Supply voltage L+ present/missing or I/O module available/not available (4 bytes)
Figure 3-3
Configuration with enabled status detection of the supply voltage L+ and enabled status detection of
the feedback voltage (8 bytes of input data)
You can read out the following status for each I/O module of the ET 200SP in the input data
(byte 0 to 7).
● Supply voltage L+ present/missing or I/O module available/not available (4 bytes)
● Feedback voltage present/missing (4 bytes)
Figure 3-4
Note
• An inserted or missing server module always signals bit=0 for the slot.
• If the server module is missing, the input data is invalid.
• For I/O modules without feedback voltage monitoring, the bit for the feedback voltage is
the same as the bit for the missing supply voltage L+.
Server module (6ES7193-6PA00-0AA0)
Manual, 03/2015, A5E03575337-AB
Supply voltage L+ missing or I/O module not available (4 bytes); feedback voltage not
available
Configuration with enabled status detection of the supply voltage L+ and enabled
status detection of the feedback voltage (8 bytes of input data)
Parameters/address space
3.3 Address space
13