Siemens SIMATIC ET 200SP Manual - Halaman 14

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 34 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Halaman Cetak
Siemens SIMATIC ET 200SP Manual
Parameter
Reaction to CPU STOP
Substitute value
Potential group
No diagnostics detection between -0.5 and +0.5 V (no short-circuit detection)
1
No diagnostics detection between -3 and +3 mA (no wire break detection)
2
Due to the limited number of parameters at a maximum of 244 bytes per ET 200SP station with a PROFIBUS GSD
3
configuration, the configuration options are restricted. If required, you can still assign these parameters using data
record 128 as described in the "GSD file PROFINET IO" column (see table above). The parameter length of the
I/O module is 8 bytes.
Note
Unused channels
"Deactivate" the unused outputs in the parameter assignment.
A deactivated output always returns the value "no current or voltage".
Analog output module AQ 2xU/I HF (6ES7135-6HB00-0CA1)
Manual, 02/2014, A5E33062529-AA
Value range
3
Turn off
•
Keep last value
•
Output substitute
•
value
For permissible
substitute values for the
various measuring
ranges, see device
manual AQ 2xU/I HF,
Substitute values →
Codes for substitute
value table
Use potential group
•
of the left module
Enable new potential
•
group
Default
Reconfigu-
ration in
RUN
Turn off
Yes
0
Yes
Use potential group
No
of the left module
Parameters/address space
4.4 Address space
Scope with configuration
software, e.g. STEP 7
(TIA Portal)
GSD file
GSD file
PROFINET
PROFIBUS
IO
DP
3
Channel
Module
Channel
Channel
Module
Module
13