Siemens SIMATIC ET 200SP Manual - Halaman 26

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 44 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Halaman Cetak
Siemens SIMATIC ET 200SP Manual
Technical specifications
Article number
● up to 60 °C, max.
● up to 70 °C, max.
24 V encoder supply
● 24 V
● Short-circuit protection
Power
Power available from the backplane bus
Power loss
Power loss, typ.
Address area
Address space per module
● Address space per module, max.
Hardware configuration
Automatic encoding
● Mechanical coding element
Digital inputs
Number of digital inputs
Digital inputs, parameterizable
Source/sink input
Input characteristic curve in accordance with
IEC 61131, type 1
Input characteristic curve in accordance with
IEC 61131, type 2
Input characteristic curve in accordance with
IEC 61131, type 3
Pulse extension
● Length
Time stamping
Time stamp (with precision of 1 ms)
Edge evaluation
Input voltage
● Type of input voltage
● Rated value (DC)
● for signal "0"
● for signal "1"
Input current
● for signal "1", typ.
26
6DL1131-6BH00-0PH1
2 A; 1 A when mounted vertically; see derating
information in Equipment Manual
1 A; See derating information in Equipment Manual
Yes
Yes; Electronic (response threshold 0.7 A to 1.3
A; for IO redundancy up to 2.6 A) Ensure sufficient
low-resistance cable routing to the sensor/actuator
in order to attain the response threshold. Depend‐
ing on the cable cross-section used, there may be
constraints regarding the usable length of cable.
80 mW
3.6 W; Maximum value (taking the max. encoder
current and the max. operating voltage into ac‐
count)
2 byte; + 2 bytes for QI information (additional 18
bytes when using high-precision time stamping)
Yes
16
Yes
Yes; P-reading
Yes
No
Yes
Yes
Off, 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s
Yes; Resolution 10 ms
Yes; Resolution 1ms
Yes; rising edge, falling edge, edge change
DC
24 V
-30 to +5V
+11 to +30V
2.5 mA
Digital Input Module DI 16x24VDC HA (6DL1131-6BH00-0PH1)
Manual, 05/2017, A5E39265608-AA