Siemens SIMATIC ET 200SP Manual - Halaman 12

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 34 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Wiring

3.1 Wiring and block diagram

Wiring: 1 and 2-wire connection of actuators

The following figure shows an example of the terminal assignment of the digital output

module DQ 4×24VDC/2A HF on the BaseUnit BU type A0 without AUX terminals (1- and

2-wire connection).

①

1-wire connection

②

2-wire connection

③

Backplane bus interface

④

Output electronics

⑤

Polarity reversal protection

⑥

Color-coded label with color code CC02

(optional)

⑦

Filter connection supply voltage (only when

light-colored BaseUnit is present)

Output signal, channel n

Image 3-1

Block diagram and terminal assignment for 1- and 2-wire connection of actuators

24 V DC

Supply voltage L+ (infeed for light-colored BaseUnit

only)

Ground

P1, P2, AUX

Internal self-assembling voltage buses

Connection to left (dark-colored BaseUnit)

Connection to left interrupted (light-colored Ba-

seUnit)

DIAG

Error or diagnostics LED (green, red)

.0 to .3

Channel status LED (green)

F0 to F3

Channel fault LED (red)

PWR

Power LED (green)

Digital output module DQ 4x24VDC/2A HF (6ES7132-6BF20-0CA0)

Manual, 12/2015, A5E32855695-AC