Siemens SIMATIC ET 200SP Manual - Halaman 16

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 29 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Parameters/address space

4.1 Parameters

Parameter

Reaction to CPU STOP •

Potential group

Only when configuring using a PROFIBUS GSD file; does not apply to configuration with STEP 7 via HSP. The parame-

ter assignment options are limited because PROFIBUS GSD configuration limits the number of parameters to a maxi-

mum of 244 bytes for each ET 200SP station. If required, you can still assign these parameters using the data record

128 as described in the column "GSD file PROFINET IO" (see table above). The parameter length of the I/O module is 8

bytes.

Value range

Turn off

Keep last value

•

Output substitute value 1

•

Use potential group of the

•

left module (module

plugged into a dark-

colored BaseUnit)

Enable new potential

•

group (module plugged in-

to light-colored BaseUnit)

Default

Reconfig-

uration in

RUN

Turn off

Yes

Use potential

group of the left

module

Digital output module RQ 4x24VUC/2A CO ST (6ES7132-6GD51-0BA0)

Scope with configuration software,

e.g. STEP 7 (TIA Portal)

GSD file

PROFINET IO

PROFIBUS DP

Channel

Module

Manual, 09/2017, A5E32855952-AB