Siemens SIMATIC ET 200SP Manual - Halaman 26

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 29 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Parameter data record

A.1

The data record of the module has an identical structure, regardless of whether you

configure the module with PROFIBUS DP or PROFINET IO. With data record 128, you can

reconfigure the module in your user program regardless of your programming. This means

that you can use all the functions of the module even if you configured it via PROFIBUS-

GSD.

Parameter assignment in the user program

You have the option to re-configure the module in RUN (e.g. the response of selected

channels to the CPU-STOP state can be changed in RUN without having an effect on the

other channels).

Changing parameters in RUN

The "WRREC" instruction is used to transfer the parameters to the module using data record

128. The parameters set in STEP 7 are not changed in the CPU, which means the

parameters set in STEP 7 will be valid again after a restart.

Output parameter STATUS

The module ignores errors that occur during the transfer of parameters with the "WRREC"

instruction and continues operation with the previous parameter assignment. However, a

corresponding error code is written to the STATUS output parameter.

The description of the "WRREC" instruction and the error codes is available in the STEP 7

online help.

Digital output module RQ 4x24VUC/2A CO ST (6ES7132-6GD51-0BA0)

Manual, 09/2017, A5E32855952-AB