Siemens SIMATIC ET 200SP Manual - Halaman 13

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 27 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Halaman Cetak
Siemens SIMATIC ET 200SP Manual
Product overview
2.1 Properties
Note
Replace the fuse
1. Remove the module from the station.
2. Insert a screwdriver into the slotted top face of the fuse holder.
3. Lift out the fuse holder.
4. Replace the fuse.
5. Slide the fuse holder back into the module.
Properties
The module has the following technical properties:
● 8 digital inputs
● Suitable for connection of switches and 2-wire sensors in accordance with IEC 61131,
type 1
The module supports the following functions:
Table 2- 1
Version dependencies of the functions
Function
Identification data
I&M0 to I&M3
Configuration in RUN
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Color identification labels
● Reference identification label
● Shield connector
You can find additional information on the accessories in the ET 200SP Distributed I/O
System (https://support.industry.siemens.com/cs/ww/en/view/58649293) system manual.
12
HW version FW version
FS01
V0.0.0 and
higher
FS01
V0.0.0 and
higher
STEP 7
TIA Portal
V5.x
as of V15 with
as of V5.5 SP3
HSP 0254
with HSP 0229
V8.0
as of V15 with
as of V5.5 SP3
HSP 0254
with HSP 0229
V8.0
Digital input module DI 8x24VAC/48VUC BA (6ES7131-6CF00-0AU0)
GSD file
PROFINET IO
PROFIBUS DP
X
X
X
X
Manual, 07/2018, A5E42285997-AA