Siemens SIMATIC ET 200SP Panduan Peralatan - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Peralatan untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 44 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Connecting

3.1

The CM PtP communications module is used with a BaseUnit of type A0 (article number

6ES7193-6BPx0-0xA0).

You connect the input and output signals to the BaseUnit of the communications module.

The supply voltage feed on the light-colored BaseUnit BU...D of the associated potential

group supplies the module.

BaseUnit

The BaseUnit is not included in the scope of delivery of the module and must be ordered

separately.

You will find an overview of the BaseUnits you can use with the communications module in

Product information on the documentation of the ET 200SP distributed I/O system

(http://support.automation.siemens.com/WW/view/en/73021864).

You can find information about selecting a suitable BaseUnit in the ET 200SP Distributed I/O

system (http://support.automation.siemens.com/WW/view/en/58649293) system manual and

ET 200SP BaseUnits

(http://support.automation.siemens.com/WW/view/en/58532597/133300) manual.

You can find information on wiring the BaseUnit, connecting cable shields, etc. in the Wiring

section of the ET 200SP Distributed I/O system

(http://support.automation.siemens.com/WW/view/en/73021864) system manual.

Supply voltage L+/M

With a light-colored BaseUnit, you connect the supply voltage to the L+ and M terminals. With

a dark BaseUnit, the supply voltage of the left-hand module is used. An internal protective

circuit protects the communications module from polarity reversal of the supply voltage. The

communications module monitors the connection of the supply voltage.

CM PtP communications module (6ES7137-6AA01-0BA0)

Equipment Manual, 03/2021, A5E03790792-01