Siemens SIMATIC ET 200SP Manual - Halaman 39

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 44 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

First BaseUnit of an ET 200SP in the configuration (as of V3.1)

Note

First BaseUnit of an ET 200SP in the configuration

The first BaseUnit of an ET 200SP station may be a dark-colored one, if an AC I/O module

or AI Energy Meter ST is plugged. Please observe the information on limiting the overvoltage

and power rating in the AC I/O module manuals.

A light-colored BaseUnit must be plugged into the slot of the first 24 V DC I/O module in

order to route the 24 V DC supply voltage via a fuse.

Note the type of the BaseUnits during the configuration.

Value status (quality information, QI)

Note

The DI 8x24VDC HF (V1.1), DQ 8x24VDC/0,5A HF (V1.1), AI 2xU/I 2-/4-wire HS,

AI 4xRTD/TC 2-/3-/4-wire HF (V1.1) and AQ 2xU/I HS I/O modules can evaluate the value

status (Quality Information, QI).

Reaction times for fail-safe modules

The following maximum reaction time of the interface module must be taken into account

when calculating the reaction times of fail-safe modules:

maximum reaction time = configured update time + 400 μs (but at least 1.4 ms)

Fail-safe modules are not compatible replacement parts

The DI 8x24VDC HF (V1.2) and DQ 8x24VDC/0,5A HF (V1.2) I/O modules are not

compatible replacement parts for I/O modules with firmware V1.1 or 1.0.

You need to re-configure these DI 8x24VDC HF (V1.2) and DQ 8x24VDC/0,5A HF (V1.2)

I/O modules.

IM 155-6 PN ST interface module (6ES7155-6AU00-0BN0)

Manual, 12/2014, A5E03576904-AC

23BCompatibility