Siemens SIMATIC NET Panduan Instalasi - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peralatan Industri Siemens SIMATIC NET. Siemens SIMATIC NET 50 halaman. Network components bus terminal
Juga untuk Siemens SIMATIC NET: Panduan Petunjuk Pengoperasian (29 halaman), Panduan Petunjuk Pengoperasian (50 halaman), Panduan Petunjuk Pengoperasian (28 halaman), Manual Petunjuk Perakitan (6 halaman), Informasi Produk (6 halaman), Panduan Instalasi (40 halaman), Panduan Instalasi (40 halaman), Panduan Referensi (14 halaman), Panduan Instalasi (34 halaman), Panduan Instalasi (48 halaman), Panduan Petunjuk Pengoperasian (32 halaman)

2.6.1

Connecting High AC/DC Power

To connect a high AC/DC power supply to the device, do the following:

Electrical hazard – risk of damage to equipment

Do not connect AC power cables to terminals for DC power. Damage to the power

supply may occur.

Electrical hazard – risk of damage to equipment

Before testing the dielectric strength (HIPOT) in the field, remove the braided

ground cable connected to the surge ground terminal and chassis ground. This cable

connects transient suppression circuitry to chassis ground and must be removed in

order to avoid damage to transient suppression circuitry during testing.

Note

Torque all terminal connections to 0.6 N·m (5 lbf-in).

RUGGEDCOM RS900F

Installation Manual, 04/2021, C79000-G8976-1350-07

NOTICE

Secure the power terminal block to the device.

Installing the Device

2.6.1 Connecting High AC/DC Power