Siemens SIMATIC NET Panduan Petunjuk Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Industri Siemens SIMATIC NET. Siemens SIMATIC NET 32 halaman. Network components bus terminal
Juga untuk Siemens SIMATIC NET: Panduan Petunjuk Pengoperasian (29 halaman), Panduan Petunjuk Pengoperasian (50 halaman), Panduan Petunjuk Pengoperasian (28 halaman), Manual Petunjuk Perakitan (6 halaman), Informasi Produk (6 halaman), Panduan Instalasi (40 halaman), Panduan Instalasi (50 halaman), Panduan Instalasi (40 halaman), Panduan Referensi (14 halaman), Panduan Instalasi (34 halaman), Panduan Instalasi (48 halaman)

Introduction

1.1

• 12M bus terminal order no. 6GK1 500-0AA10

1.2

Function

The 12M bus terminal is used to attach data terminal equipment (DTE) with an RS-485 interface

to a bus cable.

Note

A maximum of 32 12M bus terminals can be connected to one bus segment.

If other components, such as repeaters are connected to a bus segment, this reduces the

maximum number of 12M bus terminals that can be connected.

Operator controls

The bus terminal consists of the following elements and controls:

• 1 terminal block with 6 terminals for wires with a cross-sectional area of ≤ 1.5 mm

With this terminal block you can connect the incoming and outgoing bus cable and, if

necessary, Protective Earth (PE).

• Screw down clamps for shield contact

12M bus terminal

Operating Instructions, 06/2022, C79000-G8976-C333-02