Siemens SIMATIC PCS 7 Panduan Petunjuk Pengoperasian - Halaman 27
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Industri Siemens SIMATIC PCS 7. Siemens SIMATIC PCS 7 36 halaman. Process control system, basis library readme v9.0 sp1 online
Juga untuk Siemens SIMATIC PCS 7: Panduan Pengenalan (6 halaman), Manual Sistem (28 halaman), Manual Fungsi (42 halaman), Bacakan Aku (26 halaman), Manual (39 halaman)
Halaman Cetak
Using the SoE repeater module and SoE repeater extension module
5.4 Installing the mounting rail bus connectors
5.4
Installing the mounting rail bus connectors
Mounting rail bus connectors are needed if you want to extend the SoE repeater module by
SoE repeater extension modules.
Requirement
● Mounted mounting rail
● One mounting rail bus connector per module
Procedure
1. Connect the required number of mounting rail bus connectors
①
②
③
④
⑤
2. Press the connected mounting rail bus connectors
they lock into place.
Mounting and dismantling of the modules is described in section "Mounting and dismantling
the SoE repeater module and SoE repeater extension module (Page 27)".
26
SoE repeater module or SoE repeater extension module
Mounting rail bus connectors
Interface for further mounting rail bus connectors
Interface for SoE repeater module or SoE repeater extension module
Mounting rail
②
at the interface
②
against the mounting rail
AddFEM Sequence of Event
Operating Instructions, 03/2016, A5E00075541X-06
③
.
⑤
until