Siemens SIMATIC PCS 7 Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC PCS 7. Siemens SIMATIC PCS 7 39 halaman. Process control system, basis library readme v9.0 sp1 online
Juga untuk Siemens SIMATIC PCS 7: Panduan Pengenalan (6 halaman), Manual Sistem (28 halaman), Manual Fungsi (42 halaman), Panduan Petunjuk Pengoperasian (36 halaman), Bacakan Aku (26 halaman)

Halaman Cetak

2 Configuring the hardware

Configuring the hardware

2.1

Requirements

A prepared PCS 7 project is required in which at least the CPU, one PROFINET IO

system and one operator station (OS) / single station, as well as the

communication paths between the operator station (OS) / single station to the CPU

are already configured.

2.2

Integrating the GSDML file

Open the hardware configuration and install the corresponding GSDML file in the

preferred language. Make sure you have the correct firmware version

Figure 2-1

Procedure

1. Download the PROFINET GSDML file for the G120X

(.zip archive with .xml and .bmp).

2. Extract the .zip file to a local directory.

3. In the hardware configuration, select the menu: "Options > Install GSD File..."

4. Browse... > Select storage directory for the GSDML

5. Select the GSDML > Install

Note

The PROFINET GSDML file used can be found in the following article:

https://support.industry.siemens.com/cs/ww/en/view/109763250

Integration of a SINAMICS G120X frequency converter in PCS 7

Entry ID: 109793986,

V1.0,

09/2021