Siemens Simatic S7-1500 Panduan Konfigurasi - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Peralatan Industri Siemens Simatic S7-1500. Siemens Simatic S7-1500 20 halaman. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Juga untuk Siemens Simatic S7-1500: Manual (40 halaman), Manual (37 halaman), Manual (47 halaman), Manual (24 halaman), Manual (34 halaman), Panduan Pengguna (45 halaman), Manual (27 halaman), Manual (47 halaman), Manual (43 halaman), Manual (48 halaman), Manual (26 halaman), Manual (28 halaman), Manual (50 halaman), Manual (34 halaman), Panduan Pengguna (44 halaman), Manual (50 halaman), Manual (30 halaman), Manual (41 halaman), Manual (50 halaman), Manual (40 halaman), Manual Pemrograman Keselamatan (48 halaman), Panduan Instruksi Komunikasi (36 halaman), Manual (40 halaman), Manual (25 halaman), Manual (42 halaman), Deskripsi Aplikasi (50 halaman), Manual (28 halaman), Manual (33 halaman), Manual (49 halaman), Manual (36 halaman), Manual (41 halaman), Manual (46 halaman), Manual (38 halaman), Manual (35 halaman), Manual (39 halaman), Manual (28 halaman), Manual (35 halaman), Panduan Peralatan (35 halaman), Manual (50 halaman), Panduan Peralatan (32 halaman), Panduan Peralatan (38 halaman), Manual (29 halaman), Panduan Peralatan (38 halaman), Manual (34 halaman), Manual (36 halaman), Panduan Peralatan (50 halaman), Manual (45 halaman)

3 Configuration

Diagnostics with "Shared Device"

3.3

Description

If during an ongoing operation, a module of the "Shared Device" fails or is

removed, the controllers react differently to the failure of the module. The reaction

of the IO controller depends on its configured access to the module.

Note

If you remove more than one peripheral module or the server module, this results

in a station stop. All peripheral modules of the ET 200SP fail (replacement value

reaction) (\5\).

Reaction of IO controller with access to the module

If the IO controller has access to the missing module, it detects a missing module

and the error LED flashes in operation mode "RUN".

The following figure shows the "Diagnostic buffer" of the IO controller with access

to the module.

Figure 3-9

Reaction of IO controller without access to the module

If the IO controller does not have a configured access to the failed or missing

module, it does not detect and remains in operation mode "RUN".

The following figure shows the "Diagnostic buffer" of the IO controller without

access to the module.

Figure 3-10

SharedDeviceKonfig

Entry ID: 109741600,

V1.0,

11/2016