Siemens Simatic S7-1500 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Industri Siemens Simatic S7-1500. Siemens Simatic S7-1500 44 halaman. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Juga untuk Siemens Simatic S7-1500: Manual (40 halaman), Manual (37 halaman), Manual (47 halaman), Manual (24 halaman), Manual (34 halaman), Panduan Pengguna (45 halaman), Manual (27 halaman), Panduan Konfigurasi (20 halaman), Manual (47 halaman), Manual (43 halaman), Manual (48 halaman), Manual (26 halaman), Manual (28 halaman), Manual (50 halaman), Manual (34 halaman), Manual (50 halaman), Manual (30 halaman), Manual (41 halaman), Manual (50 halaman), Manual (40 halaman), Manual Pemrograman Keselamatan (48 halaman), Panduan Instruksi Komunikasi (36 halaman), Manual (40 halaman), Manual (25 halaman), Manual (42 halaman), Deskripsi Aplikasi (50 halaman), Manual (28 halaman), Manual (33 halaman), Manual (49 halaman), Manual (36 halaman), Manual (41 halaman), Manual (46 halaman), Manual (38 halaman), Manual (35 halaman), Manual (39 halaman), Manual (28 halaman), Manual (35 halaman), Panduan Peralatan (35 halaman), Manual (50 halaman), Panduan Peralatan (32 halaman), Panduan Peralatan (38 halaman), Manual (29 halaman), Panduan Peralatan (38 halaman), Manual (34 halaman), Manual (36 halaman), Panduan Peralatan (50 halaman), Manual (45 halaman)

Halaman Cetak

Siemens Simatic S7-1500 Panduan Pengguna

1. Wiring

Properties

The module has the following technical properties:

● 16 digital outputs, electrically isolated in groups of 8

● Rated output voltage 24 V DC

● Rated output current 0.5 A per channel

● Configurable substitute values (per channel)

● Configurable diagnostics (per channel)

● Suitable for solenoid valves, DC contactors, and indicator lights

● Switching cycle counter for connected actuators, e.g. solenoid valves

● Hardware compatible with digital output module DQ 16x24VDC/0.5A ST

(6ES7522-1BH00-0AB0).

The module supports the following functions:

Table 2- 1

Version dependencies of the module functions

Function

Firmware update

Identification data I&M0 to I&M3

Parameter assignment in RUN

Isochronous mode

Module-internal Shared Output

(MSO)

Configurable submodules / sub-

modules for Shared Device

Switching cycle counter

You can configure the module with STEP 7 (TIA Portal) and with a GSD file.

Compatibility

The following table shows the compatibility of the modules and the dependencies between

hardware functional status (FS) and firmware version (FW) used:

Hardware functional status

FS01

FS02

Digital output module DQ 16x24VDC/0.5A HF (6ES7522-1BH01-0AB0)

Manual, 06/2018, A5E35683409-AC

Firmware version

of the module

(TIA Portal) as of V13, SP1

V1.0.0 or higher

(PROFINET IO only)

V1.0.0 or higher

(PROFINET IO only)

V1.1.0 or higher

as of V15.0 with HSP0247

PROFINET IO only

•

Central operation with a

•

S7-1500 CPU is supported

Firmware version

V1.0.0

V1.1.0

Configuration software

STEP 7

with HSP 0143

Note

Upgrade to V1.1.0 not possible

Upgrade and downgrade possible between

V1.1.0 and higher

Product overview

2.1 Properties

GSD file in STEP 7

(TIA Portal) V12 or higher, or

STEP 7 V5.5 SP3 or higher

--- / X

---

(PROFINET IO only)