Siemens Simatic S7-1500 Panduan Pengguna - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Industri Siemens Simatic S7-1500. Siemens Simatic S7-1500 44 halaman. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Juga untuk Siemens Simatic S7-1500: Manual (40 halaman), Manual (37 halaman), Manual (47 halaman), Manual (24 halaman), Manual (34 halaman), Panduan Pengguna (45 halaman), Manual (27 halaman), Panduan Konfigurasi (20 halaman), Manual (47 halaman), Manual (43 halaman), Manual (48 halaman), Manual (26 halaman), Manual (28 halaman), Manual (50 halaman), Manual (34 halaman), Manual (50 halaman), Manual (30 halaman), Manual (41 halaman), Manual (50 halaman), Manual (40 halaman), Manual Pemrograman Keselamatan (48 halaman), Panduan Instruksi Komunikasi (36 halaman), Manual (40 halaman), Manual (25 halaman), Manual (42 halaman), Deskripsi Aplikasi (50 halaman), Manual (28 halaman), Manual (33 halaman), Manual (49 halaman), Manual (36 halaman), Manual (41 halaman), Manual (46 halaman), Manual (38 halaman), Manual (35 halaman), Manual (39 halaman), Manual (28 halaman), Manual (35 halaman), Panduan Peralatan (35 halaman), Manual (50 halaman), Panduan Peralatan (32 halaman), Panduan Peralatan (38 halaman), Manual (29 halaman), Panduan Peralatan (38 halaman), Manual (34 halaman), Manual (36 halaman), Panduan Peralatan (50 halaman), Manual (45 halaman)

Parameters/address space

4.3 Address space

Address space for configuration as 2 x 8-channel DQ 16x24VDC/0.5A HF S QI

For the configuration as a 2 x 8-channel module, the channels of the module are divided into

multiple submodules. The submodules can be assigned to different IO controllers when the

module is used in a shared device.

The number of IO controllers depends on the interface module used. Please observe the

information in the manual for the particular interface module.

Contrary to the 1 x 16-channel module configuration, each of the two submodules has a

freely assignable start address. The addresses for the respective value status of a

submodule can also be assigned by the user.

Figure 4-2

Address space for configuration as 1 x 16-channel DQ 16x24VDC/0.5A HF MSO

For the configuration as a 1 x 16-channel module (module-internal shared output, MSO),

channels 0 to 15 of the module are copied to multiple submodules. Channels 0 to 15 are

then available with identical values in various submodules. These submodules can be

assigned to up to four IO controllers when the module is used in a shared device:

● The IO controller to which submodule 1 is assigned has write access to outputs 0 to 15.

● The IO controllers to which submodule 2, 3, or 4 is assigned have read access to outputs

0 to 15.

The number of IO controllers depends on the interface module used. Observe the

information in the manual for the particular interface module.

Address space for configuration as 2 x 8-channel DQ 16x24VDC/0.5A HF S QI with

value status

Digital output module DQ 16x24VDC/0.5A HF (6ES7522-1BH01-0AB0)

Manual, 06/2018, A5E35683409-AC