Siemens Simatic S7-1500 Manual - Halaman 16

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens Simatic S7-1500. Siemens Simatic S7-1500 46 halaman. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Juga untuk Siemens Simatic S7-1500: Manual (40 halaman), Manual (37 halaman), Manual (47 halaman), Manual (24 halaman), Manual (34 halaman), Panduan Pengguna (45 halaman), Manual (27 halaman), Panduan Konfigurasi (20 halaman), Manual (47 halaman), Manual (43 halaman), Manual (48 halaman), Manual (26 halaman), Manual (28 halaman), Manual (50 halaman), Manual (34 halaman), Panduan Pengguna (44 halaman), Manual (50 halaman), Manual (30 halaman), Manual (41 halaman), Manual (50 halaman), Manual (40 halaman), Manual Pemrograman Keselamatan (48 halaman), Panduan Instruksi Komunikasi (36 halaman), Manual (40 halaman), Manual (25 halaman), Manual (42 halaman), Deskripsi Aplikasi (50 halaman), Manual (28 halaman), Manual (33 halaman), Manual (49 halaman), Manual (36 halaman), Manual (41 halaman), Manual (38 halaman), Manual (35 halaman), Manual (39 halaman), Manual (28 halaman), Manual (35 halaman), Panduan Peralatan (35 halaman), Manual (50 halaman), Panduan Peralatan (32 halaman), Panduan Peralatan (38 halaman), Manual (29 halaman), Panduan Peralatan (38 halaman), Manual (34 halaman), Manual (36 halaman), Panduan Peralatan (50 halaman), Manual (45 halaman)

4 Configuration/Engineering

Figure 4-1: Datablock "EnetIoSystem"

In this chapter the application example explains how this configuration is created

and where to get the information from.

4.2.1

Creating an Adapter description

The above shown data block contains an array of type

LCCF_typeEnetAdaptConfig. This type contains all the relevant information the

LCCF_EnetScanner function block needs to operate the herein described

Adapters.

As mentioned before, it contains addressing information, which are most important.

One of these addresses is the IPv4 address the Adapter can be reached at.

Figure 4-2: IP address of an adapter

The address is stored using the system provided datatype IP_V4. The Adapter

configuration shown above is the configuration of the ET200SP MF. It has the IP

address 192.168.74.46, which is also shown in the below IP address overview.

Table 4-2: IP addresses

EtherNet/IP Scanner

EtherNet/IP Adapter

EtherNet/IP Scanner

Entry-ID: 109782314,

V1.1.0,

Role

S7-1500

ET200SP MF

S7-1200

04/2021

System

192.168.74.12

192.168.74.46

192.168.74.45

IP address