Siemens Simatic S7-1500 Manual - Halaman 26

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens Simatic S7-1500. Siemens Simatic S7-1500 46 halaman. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Juga untuk Siemens Simatic S7-1500: Manual (40 halaman), Manual (37 halaman), Manual (47 halaman), Manual (24 halaman), Manual (34 halaman), Panduan Pengguna (45 halaman), Manual (27 halaman), Panduan Konfigurasi (20 halaman), Manual (47 halaman), Manual (43 halaman), Manual (48 halaman), Manual (26 halaman), Manual (28 halaman), Manual (50 halaman), Manual (34 halaman), Panduan Pengguna (44 halaman), Manual (50 halaman), Manual (30 halaman), Manual (41 halaman), Manual (50 halaman), Manual (40 halaman), Manual Pemrograman Keselamatan (48 halaman), Panduan Instruksi Komunikasi (36 halaman), Manual (40 halaman), Manual (25 halaman), Manual (42 halaman), Deskripsi Aplikasi (50 halaman), Manual (28 halaman), Manual (33 halaman), Manual (49 halaman), Manual (36 halaman), Manual (41 halaman), Manual (38 halaman), Manual (35 halaman), Manual (39 halaman), Manual (28 halaman), Manual (35 halaman), Panduan Peralatan (35 halaman), Manual (50 halaman), Panduan Peralatan (32 halaman), Panduan Peralatan (38 halaman), Manual (29 halaman), Panduan Peralatan (38 halaman), Manual (34 halaman), Manual (36 halaman), Panduan Peralatan (50 halaman), Manual (45 halaman)

Siemens Simatic S7-1500 Manual
4 Configuration/Engineering
Step
4.
Open the EDS file of the second
adapter with you text editor program
(e.g. Notepad).
Note the relevant data from the
differerent sections
5.
Transfer the noted data to the
EnetIOSystem data block
EtherNet/IP Scanner
Entry-ID: 109782314,
V1.1.0,
Instruction
04/2021
Result
The following data are used in this
application example
From sections
[Device]
VendorCode = 1251
ProductType = 12
ProductCode = 1200
Revision = 1.004
[Params]
Output Size = 64 Bytes
Input Size = 64 Bytes
RPI = 25 ms (25.000µs)
[Connection Manager]
Instance ID = 104 (68hex)
OT Assembly ID = 102 (66hex)
TO Assembly ID = 101 (65hex)
as a result, the EnetIoSystem should
look like the below:
26