Siemens Simatic S7-1500 Panduan Peralatan - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Peralatan untuk Peralatan Industri Siemens Simatic S7-1500. Siemens Simatic S7-1500 35 halaman. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Juga untuk Siemens Simatic S7-1500: Manual (40 halaman), Manual (37 halaman), Manual (47 halaman), Manual (24 halaman), Manual (34 halaman), Panduan Pengguna (45 halaman), Manual (27 halaman), Panduan Konfigurasi (20 halaman), Manual (47 halaman), Manual (43 halaman), Manual (48 halaman), Manual (26 halaman), Manual (28 halaman), Manual (50 halaman), Manual (34 halaman), Panduan Pengguna (44 halaman), Manual (50 halaman), Manual (30 halaman), Manual (41 halaman), Manual (50 halaman), Manual (40 halaman), Manual Pemrograman Keselamatan (48 halaman), Panduan Instruksi Komunikasi (36 halaman), Manual (40 halaman), Manual (25 halaman), Manual (42 halaman), Deskripsi Aplikasi (50 halaman), Manual (28 halaman), Manual (33 halaman), Manual (49 halaman), Manual (36 halaman), Manual (41 halaman), Manual (46 halaman), Manual (38 halaman), Manual (35 halaman), Manual (39 halaman), Manual (28 halaman), Manual (35 halaman), Manual (50 halaman), Panduan Peralatan (32 halaman), Panduan Peralatan (38 halaman), Manual (29 halaman), Panduan Peralatan (38 halaman), Manual (34 halaman), Manual (36 halaman), Panduan Peralatan (50 halaman), Manual (45 halaman)

Wiring

This section contains the block diagram of the module and outlines various wiring options.

You can find information on wiring the front connector, creating a cable shield, etc. in the

Wiring section of the S7-1500, ET 200MP system manual

(https://support.industry.siemens.com/cs/ww/en/view/59191792).

Note

Do not insert the potential jumpers included with the front connector!

Wiring and block diagram

The example in the following figure shows the terminal assignment and the assignment of

the channels. The individual channels are connected with a TRIAC (Triode for Alternating

Current).

① TRIAC 16x

② Backplane bus interface

Figure 3-1

CHx

RUN

ERROR

Block diagram and terminal assignment

Digital output module DQ 16x230VAC/1A ST Triac (6ES7522-5FH00-0AB0)

Channel or channel status LED (green)

Status display LED (green)

Error display LED (red)

Equipment Manual, 12/2021, A5E34934069-AC