Siemens SIMATIC S7-200 Panduan Pengemudi - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengemudi untuk Peralatan Industri Siemens SIMATIC S7-200. Siemens SIMATIC S7-200 28 halaman. Ethernet gateway for simatic mpi/ profibus driver
Juga untuk Siemens SIMATIC S7-200: Manual (30 halaman), Manual (35 halaman), Manual (49 halaman), Manual (18 halaman), Manual Sistem (20 halaman)
Halaman Cetak
5
General
Ethernet
or
Serial Communications
Write Optimization
Advanced
Channel Properties — General
This server supports the use of simultaneous multiple communications drivers. Each protocol or driver used
in a server project is called a channel. A server project may consist of many channels with the same
communications driver or with unique communications drivers. A channel acts as the basic building block of
an OPC link. This group is used to specify general channel properties, such as the identification attributes
and operating mode.
Identification
Name: User-defined identity of this channel. In each server project, each channel name must be unique.
Although names can be up to 256 characters, some client applications have a limited display window when
browsing the OPC server's tag space. The channel name is part of the OPC browser information.
For information on reserved characters, refer to "How To... Properly Name a Channel, Device, Tag, and Tag
Group" in the server help.
Description: User-defined information about this channel.
Many of these properties, including Description, have an associated system tag.
Driver: Selected protocol / driver for this channel. This property specifies the device driver that was selected
during channel creation. It is a disabled setting in the channel properties.
Note: With the server's online full-time operation, these properties can be changed at any time. This
includes changing the channel name to prevent clients from registering data with the server. If a client has
already acquired an item from the server before the channel name is changed, the items are unaffected. If,
after the channel name has been changed, the client application releases the item and attempts to re-
acquire using the old channel name, the item is not accepted. With this in mind, changes to the properties
should not be made once a large client application has been developed. Utilize the User Manager to prevent
operators from changing properties and restrict access rights to server features.
Diagnostics
Diagnostics Capture: When enabled, this option makes the channel's diagnostic information available to
OPC applications. Because the server's diagnostic features require a minimal amount of overhead
processing, it is recommended that they be utilized when needed and disabled when not. The default is
disabled.
Note: This property is not available if the driver does not support diagnostics.
For more information, refer to "Communication Diagnostics" in the server help.
www. ptc.com
Siemens S7-200 Driver