Siemens Simatic S7-300 Manual - Halaman 20

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens Simatic S7-300. Siemens Simatic S7-300 35 halaman. Automation systems, controlling a physical axis
Juga untuk Siemens Simatic S7-300: Panduan Pengguna (34 halaman), Manual (21 halaman), Petunjuk Pengoperasian (4 halaman), Petunjuk Pengoperasian (5 halaman), Memulai (8 halaman), Memulai (16 halaman), Deskripsi Aplikasi (24 halaman), Manual (18 halaman), Manual (32 halaman), Manual Instalasi dan Perangkat Keras (20 halaman), Memulai (32 halaman)

Micro Automation Set 14

Configuring S7-200 "Backup" station with MicroWin project

Table 5-4

No.

Connect the S7-200 CPU to a DC 24V

power supply.

Connect the configuration PC and S7-200

"Backup" with a USB/PPI cable via the

USB interface of the PC.

Plug the ribbon cable of CP 243-1 in the

interface at the S7-200 CPU.

Plug the 256 KB memory cartridge in

the S7-200 CPU.

Switch on the power supply.

Open the included S7-200 project

"Set14_S7-200_V2-0.mwp" on the

configuration PC using STEP 7

Micro/WIN and make the following

settings in STEP 7 Micro/WIN:

•

Set the access point in "Set PG/PC

Interface" to "Micro/WIN

cable(PPI)"

•

Select the USB port in the properties

of the selected access point.

Load the program to the S7-200 CPU and

restart the S7-200 CPU.

V2.0

Entry ID 21062588

Function

PC/PPI

05/18/05

Comment

Configuration PC

PPI cable

S7-200 CPU 222

CP 243-1

S7-200 CPU 222

256 KB

Live Demo

S7-200

Backup"

20/35