Siemens Simatic S7-300 Deskripsi Aplikasi - Halaman 8

Jelajahi secara online atau unduh pdf Deskripsi Aplikasi untuk Peralatan Industri Siemens Simatic S7-300. Siemens Simatic S7-300 24 halaman. Automation systems, controlling a physical axis
Juga untuk Siemens Simatic S7-300: Panduan Pengguna (34 halaman), Manual (21 halaman), Petunjuk Pengoperasian (4 halaman), Petunjuk Pengoperasian (5 halaman), Manual (35 halaman), Memulai (8 halaman), Memulai (16 halaman), Manual (18 halaman), Manual (32 halaman), Manual Instalasi dan Perangkat Keras (20 halaman), Memulai (32 halaman)

Halaman Cetak
Siemens Simatic S7-300 Deskripsi Aplikasi
3 Basics
3.2 Basic parameter configuration regarding SINAMICS V90 PN
Network:
Note: the configurations must be saved for activation.
Active configure: The active PROFINET settings can be checked from
the tab.
Table 3-1: PROFINET relevant parameters
Par. No.
P922
P8921
P8923
P8925
r8931
r8932
r8933
Speed control with SINAMICS V90 and S7-300 via Profinet
Entry-ID: 109743898,
V1.0,
Description
Telegram selection
PN IP address. There are four
indexes. Each index maps to a
segment of the IP address.
Note: after successful
configuration, the values will be
changed to 0 automatically.
PN Subnet Mask of Station. There
are four indexes. Each index maps
to a segment of the subnet mask.
Note: after successful
configuration, the values will be
changed to 0 automatically.
PN interface configuration
Note: after successful
configuration, the values will be
changed to 0 automatically.
PN IP address of station active
PN default gateway of station active
PN MAC address of station
07/2016
Set value
1
Example IP address:
192.168.0.2
P8921[0]=192
P8921[1]=168
P8921[2]=0
P8921[3]=2
Example Subnet mask:
255.255.255.0
P8923[0]=255
P8923[1]=255
P8923[2]=255
P8923[3]=0
2
Note: after setting p8921 and
p8923, p8925 should be set to
be 2 for activating the PN
communication.
8