Siemens SINAMICS G110M Manual - Halaman 40

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SINAMICS G110M. Siemens SINAMICS G110M 42 halaman. Control of a g120 or g110m with an allen-bradley controller (compact/controllogix) via ethernet/ip

Halaman Cetak

10 Glossary

Glossary

AOI (Add On Instruction): Commonly used logic for a task that is encapsulated

into a block to be reused in RSLogix programs

BICO: BICO technology (Binector Connector Technology) allows the drive to be

adapted to a wide variety of requirements. Digital and analog signals which can be

connected freely by means of BICO parameters are identified by the prefix BI, BO,

CI or CO in their parameter name.

Control Word: Arrangement of two bytes used to command the drive sequence

control (referred to as STW1 in SINAMICS Documentation)

EDS File: Text files used by RSLogix network configuration tool to help identify

products and easily integrate them on a network. All available G120 EDS files can

be found here:

https://support.industry.siemens.com/cs/ww/en/view/78026217

Free Telegrams: Send and receive telegrams that can be configured as required

by using BICO technology to interconnect the send and receive process data.

L5K file: File type used for importing an AOI into RSLogix program

MDI (Motion Direct Input): Direct setpoint input function for positioning

ODVA: Open DeviceNet Vendors Association. Organization that supports network

technologies built on the Common Industrial Protocol (CIP™) — DeviceNet™,

EtherNet/IP™, CompoNet™, and ControlNet™

PN Interface: PROFINET interface

PROFIdrive: Device profile to provide standardization of drive telegram type thus

minimizing integration and commissioning time and effort.

Siemens Standard Telegrams: Structured in accordance with manufacturer

specification with the internal process data links automatically set up in accordance

with the telegram number setting.

Standard PROFIdrive Telegrams: Structured in accordance with PROFIdrive

profile with the internal process data links automatically set up in accordance with

the telegram number setting.

STARTER: Software for Siemens SINAMICS drives configuration and diagnostics

Status Word: Arrangement of two bytes used to report the current status of the

drive (referred to as ZSW1 in SINAMICS Documentation)

UDT: User Defined Type; holds data relevant to the device

SINAMICS G: Control of a G120 with an Allen-Bradley controller

(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP

Entry-ID: 82843076,

V4.0,

09/2018