Siemens SINAMICS G120 Manual - Halaman 27

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SINAMICS G120. Siemens SINAMICS G120 42 halaman. Using blocksize converters in marine applications
Juga untuk Siemens SINAMICS G120: Memulai (46 halaman), Panduan Petunjuk Pengoperasian (32 halaman), Memulai (30 halaman), Petunjuk Pemasangan Perangkat Keras (2 halaman), Petunjuk Pemasangan dan Panduan Pemilik (2 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Pengoperasian yang Ringkas (32 halaman), Memulai (50 halaman), Panduan Perangkat (34 halaman), Panduan Pemasangan Cepat (2 halaman), Deskripsi Aplikasi (50 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman), Manual (31 halaman), Manual Aplikasi (34 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman)

6 Configuring a Generic Ethernet Module

6.1.3

Connection Parameters

Table 6-3 Setting the connection parameters

The Requested Packet Interval (RPI)

is the rate at which the controller will

exchange data with the drive. The

G120 can operate with a RPI set to a

minimum of 5 ms. In this application

we will use a value of 10 ms.

Unicast is selected as the exchange

method.

6.1.4

The IO data is available as an array of integers in the controller tags section of the

project tree. They are included as a tag list with the L5K file.

Figure 6-1 Controller Tags for new module

SINAMICS G: Control of a G120 with an Allen-Bradley controller

(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP

Entry-ID: 82843076,

V4.0,

09/2018