Siemens SINAMICS G120 Panduan Perangkat - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Perangkat untuk Peralatan Industri Siemens SINAMICS G120. Siemens SINAMICS G120 34 halaman. Using blocksize converters in marine applications
Juga untuk Siemens SINAMICS G120: Memulai (46 halaman), Panduan Petunjuk Pengoperasian (32 halaman), Memulai (30 halaman), Petunjuk Pemasangan Perangkat Keras (2 halaman), Petunjuk Pemasangan dan Panduan Pemilik (2 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Pengoperasian yang Ringkas (32 halaman), Manual (42 halaman), Memulai (50 halaman), Panduan Pemasangan Cepat (2 halaman), Deskripsi Aplikasi (50 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman), Manual (31 halaman), Manual Aplikasi (34 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman)

Diagnostics

Indicator lights

Two indicator lights in the front door of the distributed inverter box indicate the status of the

inverter:

Indicator lights

Diagnostics in detail

More detailed information about faults and warnings of the inverter can be obtained with the

following tools or accessories:

● STARTER and Startdrive PC tools

STARTER and Startdrive access the inverter via PROFINET.

● Operator Panel IOP-2

The IOP-2 is plugged into the CU250S-2 Control Unit.

You can find complete information about faults and warnings in the Internet:

You can find additional information about the PC tools and Operator Panel in the Internet:

inverter/sinamics-g120/videos/Pages/videos.aspx)

109752613)

Distributed inverter box

Manual, 06/2018, A5E43491109B AB

Inverter status

-PF1 lights up green: The inverter is ready.

-PF2 lights up red: The inverter signals a fault.

CU250S-2 List Manual (https://support.industry.siemens.com/cs/ww/en/view/109482981)

STARTER videos

(http://www.automation.siemens.com/mcms/mc-drives/en/low-voltage-

Startdrive tutorial (http://support.automation.siemens.com/WW/view/en/73598459)

Operating instructions IOP-2

(https://support.industry.siemens.com/cs/ww/en/view/