Siemens SINAMICS S120 Manual - Halaman 21

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SINAMICS S120. Siemens SINAMICS S120 41 halaman. Applications for cabinet modules, liquid-cooled
Juga untuk Siemens SINAMICS S120: Panduan Pengoperasian (20 halaman), Memulai (32 halaman), Deskripsi Singkat (22 halaman), Manual (43 halaman), Instruksi Untuk Pemasangan Di Kabinet Untuk Aplikasi Drive Kelautan (28 halaman), Manual Aplikasi (34 halaman), Manual Aplikasi (46 halaman), Panduan Petunjuk Pengoperasian (22 halaman), Memulai (32 halaman), Panduan Petunjuk Pengoperasian (21 halaman), Manual Teknik (30 halaman), Panduan Komisioning (20 halaman)

5 Drives Configuration

Drives Configuration

Commissioning of the S120 drives is not in the scope of this document. Refer to

the "Getting Started with S120 with Starter" to assist in the commissioning of the

drive(s).

https://support.industry.siemens.com/cs/ae/en/view/109754314

A sample application referenced in this document utilizes the 2 axis SINAMICS

S120 training unit. The Red Wheel drive on the training unit is configured as a

speed controlled drive and the Blue wheel drive is configured for positioning using

the EPOS technology module. The CU310-2 can now be used with EIP and

telegrams in example can be used in with CU310-2. There is an example AB

Program and Starter program included for the CU310-2 if there is a Single Axis

S120 Demo or an application available.

5.1

The IP address can be set from Starter. Make sure that your PC has same Subnet

as address desired for S120 and AB PLC.

2. Use Accessible Nodes to Find CU320-2. Afterwards Set IP address for

CU320-2 or CU310-2.

SINAMICS S: Speed control of a S120 with an Allen-Bradley controller

(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP

Entry-ID: 92045369,

V4.0,

08/2018