Siemens SINAMICS S120 Manual - Halaman 43

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SINAMICS S120. Siemens SINAMICS S120 43 halaman. Applications for cabinet modules, liquid-cooled
Juga untuk Siemens SINAMICS S120: Panduan Pengoperasian (20 halaman), Memulai (32 halaman), Manual (41 halaman), Deskripsi Singkat (22 halaman), Instruksi Untuk Pemasangan Di Kabinet Untuk Aplikasi Drive Kelautan (28 halaman), Manual Aplikasi (34 halaman), Manual Aplikasi (46 halaman), Panduan Petunjuk Pengoperasian (22 halaman), Memulai (32 halaman), Panduan Petunjuk Pengoperasian (21 halaman), Manual Teknik (30 halaman), Panduan Komisioning (20 halaman)

SINAMICS S120 Fail-Safe Drives

The use of the safety functions integrated in the drive has been selected

and these can now be activated or deactivated using the operator elements

at the F-CPU.

Only the following messages should be visible

These messages doe not influence the functionality described above.

6.7

Acceptance test

To verify the safety-related parameters, when commissioning the machine

for the first time and also when making changes to the safety-relevant pa-

rameters, an acceptance test must be carried-out. It is imperative that the

acceptance test must be correspondingly logged and documented. The ac-

ceptance reports should be appropriately stored and archived.

The acceptance test must be performed after parameterization has been

completed and power-on reset.

Information about the acceptance test, the acceptance report and an ex-

ample of corresponding acceptance report are provided in the "Function

Manual SINAMICS S120 Safety Integrated" (FHS) in the chapter, Accep-

tance test and acceptance report.

Table 7-1 History

Version

V1.0

V1.1

I DT Safety Integrated

Date

14.02.2008

First edition

22.01.2009

Second edition

Page 43/43

Entry ID: 28424136

Revision

MC-FE-I-005-V11-EN