Siemens SINAMICS S120 Instruksi Untuk Pemasangan Di Kabinet Untuk Aplikasi Drive Kelautan - Halaman 9

Jelajahi secara online atau unduh pdf Instruksi Untuk Pemasangan Di Kabinet Untuk Aplikasi Drive Kelautan untuk Peralatan Industri Siemens SINAMICS S120. Siemens SINAMICS S120 28 halaman. Applications for cabinet modules, liquid-cooled
Juga untuk Siemens SINAMICS S120: Panduan Pengoperasian (20 halaman), Memulai (32 halaman), Manual (41 halaman), Deskripsi Singkat (22 halaman), Manual (43 halaman), Manual Aplikasi (34 halaman), Manual Aplikasi (46 halaman), Panduan Petunjuk Pengoperasian (22 halaman), Memulai (32 halaman), Panduan Petunjuk Pengoperasian (21 halaman), Manual Teknik (30 halaman), Panduan Komisioning (20 halaman)

Fig. 2: Cabinet setup with mounting plate set toward the front

Cabinet:

Installation of Motor Modules, Active Line Modules and Diode Line Modules

The Motor Modules, Active Line Modules and Diode Line Modules shhall be mounted

to the backside of a mounting plate, in compliance with their fixing holes. The

mounting plate can be mounted to the backside of the cabinet, as shown in Fig. 1. If

the arrangement of the mounting plate is not possible at the backside of the cabinet,

special attention has to be paid on a stable installation of the mounting plate (see Fig.

2).

Underneath the power units mounting brackets have to be fixed for the support of the

power units.

Additionally a fixation in the front section of the power units is required. For that, in

case of Motor Modules, Active Line Modules and Diode Line Modules, the holes of the

lower mounting brackets and the thread hole of the eyebolt can be used (eyebolt is

mounted for transportation only).

Instruction for installation of the liquid-cooled chassis of Sinamics S120 power units into cabinets for marine drive applications,

12/2016, 4BS0808-003

Reinforcement of the cabinet in the bottom area

Stiffening frame for the cabinet door

Per each side minimum three struts in direction of the cabinet depth

Mechanical design