Siemens SINUMERIK 808D Panduan Petunjuk Pengoperasian - Halaman 31
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Industri Siemens SINUMERIK 808D. Siemens SINUMERIK 808D 34 halaman. Connecting with v60 driver
Juga untuk Siemens SINUMERIK 808D: Panduan Servis (46 halaman), Panduan Servis (48 halaman), Petunjuk (2 halaman), Panduan Instalasi (48 halaman)
Halaman Cetak
Appendix
A.1
Inserting, printing or cutting the MCP strips
Inserting the MCP strips
The MCP strips for the SINUMERIK 808D (Turning) are already pre-assembled into the
MCP. If you are using the control system of Milling version, you need to take these pre-
assembled strips out firstly, and then insert the MCP strips for the Milling version into the
MCP by yourself.
To insert the MCP strips, follow the order shown as follows with reference to the marks (M1
to M6, T1 to T6) on the strips:
Printing customized MCP strips
Siemens provides you a symbol library for customized MCP keys. You can print customized
strips with the A4-size blank paper included in the delivered MCP packaged. You can find
the symbol library in the Toolbox (...\04040000\examples\MCP).
Siemens also provides you a template file for printing customized strips. Key positions in the
template accord with real key layout on the MCP. You can copy symbols from the symbol
library and paste them to the key positions that you want to use customized symbols. You
can find the template file in the Toolbox (...\04040000\examples\MCP).
Cutting customized MCP strips
The delivered A4-size paper has been pre-cut with boundaries. You just need to tear them
off after printing customized symbols.
Mechanical Installation Manual
Operating Instructions, 12/2012, 6FC5397-2EP10-0BA0
A
31