Siemens SINUMERIK 808D Panduan Instalasi - Halaman 27
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peralatan Industri Siemens SINUMERIK 808D. Siemens SINUMERIK 808D 48 halaman. Connecting with v60 driver
Juga untuk Siemens SINUMERIK 808D: Panduan Petunjuk Pengoperasian (34 halaman), Panduan Servis (46 halaman), Panduan Servis (48 halaman), Petunjuk (2 halaman)
Halaman Cetak
Be sure not to connect the pin 2 of X301/302 to ground; otherwise, the CNC controller or
the power supply could be damaged!
Note
The 24 V output of X301/302 pin 2 comes from pins 47 to 50.
Note
Addressing ranges
X301: IB3, IB4, IB5, QB2, QB3
X302: IB6, IB7, IB8, QB4, QB5
Note
The connecting cable between the power source, load current supply connection, and
associated reference potential M must not exceed the maximum permissible length of 10 m.
Digital inputs
The diagram below shows you how to connect the connector pins of the digital inputs at
interface X301 (example). You can connect connector X302 in the same way.
Note
When using an external power supply, you must connect the 24V (permissible range: 20.4 -
28.8 V) power supply for the digital outputs to all the four power input pins (X301, X302: pins
47, 48, 49, 50).
Electrical Installation Manual
Operating Instructions, 12/2014, 6FC5397-2EP10-0BA0
CAUTION
3.3 Connecting the interfaces on the PPU
Connecting
27