Siemens SINUMERIK 840DE SL Panduan Peralatan - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Peralatan untuk Peralatan Industri Siemens SINUMERIK 840DE SL. Siemens SINUMERIK 840DE SL 28 halaman. Emergency stop button
Juga untuk Siemens SINUMERIK 840DE SL: Panduan Pengoperasian (33 halaman), Panduan Peralatan (24 halaman), Panduan Peralatan (26 halaman), Panduan Peralatan (28 halaman)
Halaman Cetak
Fundamental safety instructions
1.1 General safety instructions
Electric shock due to equipment damage
Improper handling may cause damage to equipment. For damaged devices, hazardous
voltages can be present at the enclosure or at exposed components; if touched, this can result
in death or severe injury.
• Ensure compliance with the limit values specified in the technical data during transport,
• Do not use any damaged devices.
Electric shock due to unconnected cable shields
Hazardous touch voltages can occur through capacitive cross-coupling due to unconnected
cable shields.
• As a minimum, connect cable shields and the cores of cables that are not used at one end
Electric shock if there is no ground connection
For missing or incorrectly implemented protective conductor connection for devices with
protection class I, high voltages can be present at open, exposed parts, which when touched,
can result in death or severe injury.
• Ground the device in compliance with the applicable regulations.
NOTICE
Damage to equipment due to unsuitable tightening tools.
Unsuitable tightening tools or fastening methods can damage the screws of the equipment.
• Be sure to only use screwdrivers which exactly match the heads of the screws.
• Tighten the screws with the torque specified in the technical documentation.
• Use a torque wrench or a mechanical precision nut runner with a dynamic torque sensor and
6
WARNING
storage and operation.
WARNING
at the grounded housing potential.
WARNING
speed limitation system.
Emergency stop button
Equipment Manual, 10/2020, A5E49939755B AA