Siemens SINUMERIK ONE MCP 1900.2 Panduan Peralatan - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Peralatan untuk Peralatan Industri Siemens SINUMERIK ONE MCP 1900.2. Siemens SINUMERIK ONE MCP 1900.2 26 halaman.

Halaman Cetak

Dimension drawings

Panel cutout

The MCP 1900.2 is secured using 12 M5 nuts. The tightening torque is 1.5 Nm. In addition to the

M5 nuts, use the spring elements provided. Customers are responsible for the geometry of the

panel cutout, as well as mounting the MCP in the housing. To mechanically protect the outer

edge of the front panel, the device must be installed so that it is recessed by at least 0.5 mm with

respect to the surrounding housing.

①

All corner radii <= R5 or chamfer <= 5x45°

In the seal area

Figure 3-2

Panel cutout

ONE MCP Part 2: MCP 1900.2

Equipment Manual, 01/2023, A5E52559449B AA